About our Van Racking System

  1. Our system is based around a modular design, aimed directly at trades people and the service industry.
With in our system it starts with just 2 unit options. Multiple width, 2 standard depths and multiple heights. Pick from our standard SH1, SH2, SH3 or fully customise your unit with the Build A Unit. We have the most Unique wooden system thats simple yet affordable.

 

2 Unit Options

 Standard unit with a standard top

standard depth

SKU: 12-STD-ST-SD-380-SH2-SYS

Systainer van racking storage
Key points

Fits between the van bulkhead,

and the start of the wheel arch box.

Or ideal for any sliding door facing out.

Wheel arch unit with a standard top

standard depth

SKU: 12-WA-ST-SD-380-SH2-SYS

systainer wheel arch unit van racking
Key points
 
Fits over wheel arch boxes. Our standard range will fit wheel arch box height up to 420mm high. Custom wheel arch heights available on request.

4 Ranges

BoxRackKing van racking unit table

Unit Top Options

Standard Top (SH1) Flat Top (SH2, SH3, Build a unit)
  • Creates a top tray for additional storage
  • Can create one long top tray for additional storage with one or more unit, by removing the intermediates. 
  • Available for SH1-SH2 
  • Used along side the guide and level storage on the bottom of the units
  • Creates more box storage in the inside of the unit
  • Available for SH2-SH3 & build a unit
Concept 1200 standard top
 

Unit Depth Options 

Standard Depth (380mm) Slimline Depth (322mm)
(SH1)
(Flat shelves come with 2 securing pins ideal for any flat bottom boxes)
(SH1)
(Flat shelves come with 2 securing pins ideal for any flat bottom boxes)
(SH2) (Includes feet holes recessed into the shelf or additional pins, No drawer option)
(SH2) (Includes feet holes  recessed into the shelf or additional pins, No drawer option)
(SH3) (same as option 2 & includes 322mm & 380mm depth drawer options)
(SH3) (same as option 2 & includes 322mm depth drawer options)
OPTIONS
OPTIONS
  • Standard depth drawer option (322mm)
  • Extra deep drawers option (380mm)
  • Full extendable drawer
  • 380mm shelf depth
  • Standard depth drawer option (322mm)
  • 322mm shelf depth
 

Standard Depth Drawer (322mm)

ADD TO ANY SH3 UNITS

Small (44) Medium (108) Large (172)
Internal height: 44mm Internal height: 108mm
Internal height:172mm
Internal depth: 298mm
Internal depth: 298mm
Internal depth: 298mm
Internal width: 378mm minimum
Internal width: 378mm minimum
Internal width: 378mm minimum
Internal width: 578mm maximum
Internal width: 578mm maximum
Internal width: 578mm maximum

 

Extra Deep Drawer (380mm)

ADD TO ANY SH3 UNITS

Small (44) Medium (108) Large (172)
Internal height: 44mm Internal height: 108mm
Internal height:172mm
Internal depth: 356mm
Internal depth: 356mm
Internal depth: 356mm
Internal width: 378mm minimum
Internal width: 378mm minimum
Internal width: 378mm minimum
Internal width: 578mm maximum
Internal width: 578mm maximum
Internal width: 578mm maximum

Custom Drawer Heights

We can offer custom drawer heights if required as shown below. Please send us a message.
gas man van racking

 

POWER TOOL OPTIONS (SH2) OR UPGRADE TO SH3 TO ADD DRAWERS TO THE SYSTEM

Festool Tloc Dewalt Tough System Dewalt Tstack
429mm 629mm 474mm
Bosch Lboxx Makita Makpac Stanley Organiser
474mm 429mm 474mm
 
Milwaukee (NEW 2021)
600mm



Standard Widths SH1

6 x Standard width options. Supplied with flat shelves with x2 front shelf securing pins 6 x 20, to take any none standard box. Standard units supplied with 4 shelves and wheel arch unit supplied with 3 shelves.

429mm 474mm 500mm 600mm  529mm 629mm
 Shelf securing pins
Shown on a Systainer SH3 shelf, all standard widths are supplied with flat shelves (no feet holes) including 2 pins as shown in the photo.